Volume - Electrolux EWM3500 Service Manual

4.2.12.2 Volume

Push button 3 or 4 and scroll down the menu till:
"SETTINGS"
Wait two seconds the writing changes to:
"PUSH OK" button 5.
Push button 3 or 4 and scroll down the menu till:
"VOLUME"
Push button OK (5).
The digit under the loudspeaker symbol starts to flash. Now
it is possible to vary the volume level pushing buttons 3 or 4
in sequence (at every variation the sound is activated to
represent the reached level and the digit changes from zero
to nine). To confirm the choice, push button OK (5).
Waiting some seconds or pushing buttons: TEMPERATURE (1) or SPIN (2) the main screen is displayed again.
Pushing button OK (5) the volume is selected again.
Pushing button START/PAUSE (6) the washing cycle starts.
SOUND
The appliance features three types of melodies (one for the switching on, one for the programme start and one
for the end of the washing cycle) and a series of beeps in case of alarm.
Every time the appliance is switched on (programme start).
When the appliance is switched off and then on again it does not emit a sound (programme started).
At the end of the cycle with decreasing frequency (for about three minutes).
During the alarms the sound is repeated for about five minutes (series of beeps).
No sound is emitted during the rotation of the selector knob, or when a button is pressed.
To activate the sound it is necessary to regulate the volume at zero level.
SOI/DT 2007-02 dmm
26/66
599 38 61-92