7.
Now, you can find your printer's icon and you can use the SMB printing mode.
Reset Button
Reboot the Print server:
1.
Verify the power of print server is turned on.
2.
Press the reset button once, and then release it.
WARNING: This will restart the print server and stop all on-going and pending print jobs!
Perform a Factory Default:
1.
Disconnect the external power adapter.
2.
Hold down the reset button.
3.
Reconnect the external Power Adaptor. Wait about 5~6 seconds.
4.
Release the reset button.
5.
The print server will restart.
WARNING: This will erase all settings of print server to default and should be performed
with caution!
Fig 59
75
DG-PS1010U User Manual