Appletalk Setup - Digisol DG-PS1010U User Manual

AppleTalk Setup

The print server can print jobs submitted from Macintosh workstations connected to an Ethernet
using AppleTalk protocol. The basic configuration is for the print server in an AppleTalk
environment is performed simply by opening the Chooser window and selecting a printer that is
connected to the print server.
1. Click Setup, it appears the sub-menu.
2. Click AppleTalk, it as shown in the following picture.
3. AppleTalk Zone:
In this option, type an AppleTalk Zone name that you want the print server to belong
to or leave it in default (This enables the print server automatically search and link
itself to the default zone that is set on the AppleTalk router, if found). We also
assume that at least an AppleTalk Zone exists on the network. If no any zone
exists, the print server itself displays the zone name as an asterisk (*) in the current
AppleTalk Status of the print server in the web browser.
4. Port Name:
In this option, type a name for identification purpose or just leave it in default
(recommended).
Fig 35
44
DG-PS1010U User Manual