Manual Setup - Digisol DG-PS1010U User Manual

Manual Setup

Manual Setup is a configuration program designed for more experienced users of NetWare. To
setup the print server by using Manual Setup follow the below mentioned steps:
1. Run PCONSOLE in NetWare 3.x or NetWare 4.x and create the necessary parameters
(Refer to your Novell NetWare print server/Services manual for details).
2. Log into your NetWare file server as a Supervisor (Admin) or equivalent. From your
Windows 95/98/Me run PSAdmin.
3. Select the print server that you wish to configure.
4. Click Properties in the tool bar and the following screen will appear, Properties
button ＜
5. Select NetWare and type in the Print server that was created during PCONSOLE.
6. (Optional) In Bindery Settings, Select NetWare file server(s) that print server can do
Bindery mode.
7. (Optional) In NDS Settings, Select NetWare file server(s), NetWare 4.x or later that print
server can do NDS mode.
8. Click OK. From your NetWare client computer, such as Windows 95/98/Me, create a
printer that is connected (redirected) to one of the NetWare print queues serviced by the
print server.
＞ as shown in following picture.
Fig 17
21
DG-PS1010U User Manual