Using Psadmin; Wizard - Digisol DG-PS1010U User Manual

DG-PS1010U User Manual

Using PSAdmin

After the software of setup CD is successfully installed, start PSAdmin utility from your Windows
Start menu: start -> All Programs -> Network Print Server -> PSAdmin. The screen will then
appear as following Fig-13.
Fig 13
All print server(s) feature will be displayed along with their respective device name, MAC Address,
print server name, firmware version, and status. The terms are defined as follows:
Device Name: The name of the print server hardware used for identification purposes.
MAC Address: The Ethernet address of the print server.
Print server Name: The print server to which the device is attached.
Version: The firmware version of the print server.
Status: To display a Printer's present status.

Wizard

Wizard is a configuration program that can assist you in setting up the necessary parameters for
your print server to function. Setup a print server by using Wizard.
18