Table of Contents
Advertisement
Chapter 2 Installing the DPC2434 and EPC2434 for Internet Service
Configure TCP/IP
This section contains instructions for configuring the wireless home gateway to run
in Microsoft Windows or Macintosh environments. In addition, TCP/IP protocol in a
Microsoft Windows environment is different for the Windows 95, 98, 98SE, ME,
2000, or XP versions. Go to the appropriate section and follow the instructions to
configure the TCP/IP protocol.
Configuring TCP/IP on Windows 95, 98, 98SE, or ME Systems
1
Click Start, select Settings, and choose Control Panel.
Double-click the Network icon in the Control Panel window.
2
3
Read the list of installed network components under the Configuration tab to
verify that your PC contains the TCP/IP protocol/Ethernet adapter.
4
Is TCP/IP protocol listed in the installed network components list?
If yes, go to step 7.
If no, click Add, click Protocol, click Add, and then go to step 5.
5
Click Microsoft in the Manufacturers list.
6
Click TCP/IP in the Network Protocols list, and then click OK.
7
Click the TCP/IP Ethernet Adapter protocol, and then choose Properties.
Click the IP Address tab, and then select Obtain an IP address automatically.
8
9
Click the Gateway tab and verify that these fields are empty. If they are not
empty, highlight and delete all information from the fields.
10 Click the DNS Configuration tab, and then select Disable DNS.
11 Click OK.
12 Click OK when the system finishes copying the files, and then close all
networking windows.
13 Click YES to restart your computer when the System Settings Change dialog box
opens. The computer restarts. The TCP/IP protocol is now configured on your
PC, and your Ethernet devices are ready for use.
14 Try to access the Internet. If you cannot access the Internet, go to Having
Difficulty? (on page 52). If you still cannot access the Internet, contact your
service provider for further assistance.
Configuring TCP/IP on Windows 2000 Systems
1
Click Start, select Settings, and choose Network and Dial-up Connections.
Double-click the Local Area Connection icon in the Network and Dial-up
2
Connections window.
Click Properties in the Local Area Connection Status window.
3
22
78-4011351-01 Rev B
Advertisement
Table of Contents
Troubleshooting
