Fisher & Paykel CT560QX User Manual page 10

Dual element control
The left front element is designed for dual element control, using either the inner or full
element.
With the cooktop turned on, touch the
1
button in the touch controls. The red light
will stop flashing and remain static.
Select the element temperature setting,
2
using the arrows as required. Only the
inner element will come on. (Remember
the cooktop regulates the element
temperature, and you may notice the
element turn off and back on again).
To select the full element, touch the
3
you have set the temperature.
A red light will show beside the
4
the full element temperature with the arrows.
To return to the inner element only, touch the
when the cooktop is turned off.
Auto heat-reduce
Your Sol X cooktop has an effort saving function, to quickly bring your element to the
maximum temperature setting (9), then automatically reduce the element temperature setting
to maintain a lower heat to cook your food at. This limits the risks of spill overs and burning.
Ideal for boiling water for pasta and then automatically lowering the heat and maintaining a
rapid simmer until al dente.
To set the function, turn the element on by touching the corresponding element button.
Using the arrows scroll past 9 to display
the temperature setting you would like the element to reduce to.
The temperature settings of 1-9 you set the element to reduce to, correspond with the
same temperature settings for standard element use, 1 being low and 9 being high. Every
temperature setting between 1 and 9 has a different fixed time. (Refer to the 'Auto Heat-
Reduce Guide').
Eg. Auto Heat Reduce 6 setting, will heat and maintain the element to the maximum
temperature (9), for 2.5 minutes. After the time has elapsed, the element will reduce to the
lower temperature setting of 6 and maintain this until the element or cooktop is turned off.
Please note, the maximum temperature (9) never reduces.
8
1
4
button. Note: You cannot select the full element until
button, when the full element is selected. You can modify
button again. The dual setting is cleared
. When is showing, use the arrows again to select
3 2
Sol X Dual element controls