Panasonic WV-NM100 Operating Instructions Manual page 64

ADVANCED SETTINGS
DDNS Setup
DDNS (Dynamic Domain Name Service) enables you to
access the camera by entering the host name and
domain name.
"DDNS"
Select "ON" or "OFF" to set whether or not to use
DDNS (Dynamic Domain Name Service). Making a
connection to an exclusive server is required for the
camera to be serviced.
"Host name"
Enter the host name given by the administrator of
the server. Domain name can be omitted.
Characters for "Host name"
Up to 255 characters (ABCDE-
FGHIJKLMNOPQRSTU
VWXYZabcdefghijklmnopqrstuvwxyz0123456789.-)
Default setting for "Host name": WV-NM100
"User name"
Enter the user name given by the administrator of
the server.
Characters for "User name"
Up to 32 characters (ABCDEFGHIJKLMNOPQRST
UVWXYZabcdefghijklmnopqrstuvwxyz0123456789!
#$%'=~|`{}?_-^/@*.+)
Default setting for "User name"
Nothing is entered for this parameter.
"Password"
Enter the password given by the administrator of the
server.
Characters for "Password"
1 to 32 characters (ABCDEFGHIJKLMNOPQRST
UVWXYZabcdefghijklmnopqrstuvwxyz0123456789!
#$%'()=~|`{}<>?_-^[]/@*,.:;+\)
Default setting for "Password"
Nothing is entered for this parameter.
! Important
• If the setting item is overlapped between "Basic setup" and "Advanced setup", the latest setting has priority.
For example, if a different setting is made on the "System" page after the same item has been set on the "Basic
setup" page, the setting made on the "System" page is valid.
• When using the DDNS function, select ON for DNS in the "Network" page (refer to page 26), and be sure to set
the IP address of the DNS server.
64
"Access interval"
Select 10 minutes, 30 minutes, 1 hour, 6 hours, or
24 hours for the access interval on DDNS for IP set-
ting.
Default setting for "Access interval": 1 hour
[Info] button
Displays the error information page. You can check the
situation of the error occurrence. For further information,
refer to page 71.