Other Functions; Alarm Connector And Aux Output Connector; Customizing The Contents Of The Alarm Mail - Panasonic WV-NM100 Operating Instructions Manual

OTHER FUNCTIONS

Alarm Connector and AUX Output Connector

Alarm input connector
Ground terminal
Alarm output connector
AUX output connector
(To control external devices:
for example, lighting ON and OFF)

Customizing the Contents of the Alarm Mail

You can customize the contents of the alarm mail notifying that an alarm has occurred and the alarm date and time.
To customize them, do the following:
STEP1
Create the contents of the alarm mail with a text editor and save the file as "almmail.tmpl".
STEP2
Start up the FTP software and connect to the camera by entering the IP address of the camera.
The destination where to transfer the file is "/flash". To login to the camera, enter "admin" for the user
name and the password registered for the user name "admin" if the password has been changed (the
default password is "password").
STEP3
Upload the new file (almmail.tmpl) in text format to the camera.
53
You can set the alarm operation when an exter-
nal device such as a sensor is connected to the
alarm connector inside the cord cover of the
Security door
camera.
sensor
You can set functions such as sending e-mails
or transferring pictures to the server when an
alarm signal is input by a sensor, as explained in
"Settings of the Actions to be Performed when
Motion is Detected" on page 43.
! Important
Do not connect an external device if it is
beyond the specified ratings of the camera
(refer to page 68).
You can set the type of the device connected to
the AUX output connector.
The settings can be made on the "AUX output"
page of "Alarm&Transmission".
Click the [Alarm&Transmission] button, and then
click the [AUX output] tab.
The "AUX output" page of "Alarm&Trans-
mission" appears and you can check the current
setting of the "AUX setup".
Click the [SET] button after selecting "High" or
"Low", according to the specifications of the
external device to be connected, to enable the
setting.