Panasonic WV-NM100 Operating Instructions Manual page 47

Screenshot 3
The "Alarm" page appears.
Screenshot 4
The "VMD area" page appears.
47
STEP3
Click the [VMD area] tab.
STEP4
Select the desired area number to be registered
by clicking the [Area 1] - [Area 4] radio buttons.
Up to four areas can be designated.
Designate the area for the selected area number
by clicking on the picture.
To designate the area, click the top left corner
and the bottom right corner of the area you wish
to set.
To cancel the designated area, select the area
number to be canceled from the pull-down
menu, and press the [RESET] button.
STEP5
Click the [SET] button after completing the set-
ting.