Receiving Radio Broadcasts - Kenwood K-821DV Instruction Manual

Compact hi-fi component system

Table of Contents

Presetting Stations Automatically (AUTO MEMORY) R P.56

Presetting Stations Manually (Manual Preset) R P.57

Information

Audio Settings R P.69 onwards

Choosing from stations that are not preset (Auto/ Manual Tuning)

1 Select Auto tuning or Manual tuning.

[AUTO/MONO] key.

Press the [TUNING MODE]

The mode changes as shown below each time you press the key.

AUTO

Auto tuning

(Select this mode when

reception is good.)

2 Select a station.

Press the [TUNINGI/J] key.

Press the [G/I] or [J/H] key.

When the station is tuned, "TUNED" lights up on the display. If you are re-

ceiving a stereo signal, "ST." also lights up.

Using Auto tuning

The radio automatically tunes in to the next station each time you press

the key. Repeat this step until you are tuned in to your preferred station.

Using Manual tuning

Press the key until the desired station is tuned or until you reach the de-

sired frequency.

There is no sound while Auto/Manual tuning is in progress.

Auto tuning provides stereo reception while manual tuning provides

monaural reception.

The display changes as shown below each time you press the [DISPLAY] key.

FM:

Australia/Europe: Program service name R Preset No. R Day/Clock

U.S.A.: Preset No. R Day/Clock

When the program service name is not stored:

Preset No. R "NO PS" R Day/Clock

AM:

Preset No. R Day/Clock