Drive Bay Installation/Removal; Accessing The Drive Bays - Supero AS2021M-T2R+ User Manual

AS2021M-T2R+/2021M-82R+ User's Manual
6-4

Drive Bay Installation/Removal

Accessing the Drive Bays

SATA/SCSI Drives: You do not need to access the inside of the chassis or remove
power to replace or swap SATA/SCSI drives. Proceed to the next step for instruc-
tions. Note: You must use standard 1" high, SATA/SCSI drives in the 2021M-
T2R+/2021M-82R+.
DVD-ROM/Floppy Disk Drive: For installing/removing the DVD-ROM or fl oppy disk
drive, you will need to gain access to the inside of the server by removing the top
cover of the chassis. Proceed to the "DVD-ROM and Floppy Drive Installation"
section later in this chapter for instructions.
5.25" Drive Bay: For installing/removing a component in the 5.25" drive bay, proceed
to the "5.25" Drive Bay Installation" section later in this chapter for instructions.
Figure 6-2. Removing System Cooling Fans
6-4