Table of Contents
Advertisement
AS2021M-T2R+/2021M-82R+ User's Manual
2. Installing/removing hot-swap SATA/SCSI drives
The SATA/SCSI drive carriers are all easily accessible at the front of the chassis.
These hard drives are hot-pluggable, meaning they can be removed and installed
without powering down the system. To remove a carrier, push the release button
located beside the drive LEDs. Then swing the colored handle fully out and use it
to pull the unit straight out (see Figure 6-4).
Note: Your operating system must have RAID support to enable the hot-plug ca-
pability of the SATA/SCSI drives.
Figure 6-4. Removing a Serial ATA Drive Carrier
Handle
Release Button
Important: All of the SATA/SCSI drive carriers must remain in
!
the drive bays to maintain proper cooling airfl ow.
6-6
Advertisement
Table of Contents
