Brother MFC990CW Service Manual page 397

(16) If the bottom margin is out of the specified range, press the 6 key twice and the # key on the
machine. For models without numerical keypad, enter 6, 6, and # in this order using the
and OK keys.
NOTE: In models with touch panel, to display the numerical, * and # keys, it is necessary
to switch the software keypad between the numerical and function keypads by pressing the
Scan and Copy keys simultaneously.
The "BOTTOM: 30" appears on the LCD.
(17) To adjust the bottom margin, enter the measured value (in units of 0.1 mm) multiplied by
10.
In this example, the bottom margin measured in step (15) is 3.1 mm, so press the 3, 1, and
OK keys.
Upon completion of the entry, the machine automatically returns to the initial stage of the
maintenance mode.
(18) Go back to step (14) and print out the bottom margin check pattern again.
(19) Measure the bottom margin on the printed pattern.
If it is within the range from 2.9 to 3.1 mm, the adjustment is completed.
9-45
,
Confidential