Philips HQ8290CC User Manual page 21

3 The shaver is not entirely clean after I clean it in the Jet Clean
System.
- The cleaning fluid in the cleaning chamber may be soiled. Empty and
rinse the cleaning chamber.
- The cleaning fluid level may be too low. If the fluid volume in the
cleaning chamber drops below the minimum level during the cleaning
program, the program aborts.The cleaning symbol and the 'fluid low'
symbol flash at intervals and the holder returns to its starting position.
Refill the cleaning chamber with cleaning fluid up to the MAX
indication (see chapter 'Cleaning and maintenance').
- You may have used another cleaning fluid than the original Philips
cleaning fluid. Only use HQ200 cleaning fluid.
- The locking lever of the Jet Clean System has not been closed
properly, or the shaver has not been placed properly. If this is the case,
the Jet Clean System starts to operate, but the cleaning program
does not function properly.
4 The Jet Clean System does not work when I press the on/off
button.
- The Jet Clean System may not be connected to the mains. Put the
small plug in the Jet Clean System and put the adapter in the wall
socket.
EnglisH
23