Using The Ovens - GE Monogram ZDP48N4G Owner's Manual

To avoid possible burns, place the oven racks
Oven racks
in the correct position before you turn the
oven on.
The correct rack position depends on the kind
of food and the browning desired.
The oven racks have stop-locks, so that when
placed correctly on the supports, they will stop
before coming completely out, and will not tilt.
When placing and removing cookware, pull
the rack out to the bump on the rack support.
To remove a rack, pull it toward you, tilt the
front end up and pull it out.
To replace, place the end of the rack on the
support, tilt up the front and push in.
How to set
the oven
controls
1 Select the desired oven mode by pushing one
2 Select the desired temperature by turning
• The Oven light will glow and remain on until
• The Heating light will glow. The oven is
3 Turn the oven off by pushing the OFF Mode
22
of the Mode Selector Buttons: BAKE, CONV,
BROIL, or CLEAN.
the Oven Thermostat Knob.
the OFF selector button has been pushed or
the thermostat dial has been turned to the
OFF (O) position.
preheated to the set temperature when the
Heating light initially cycles off.
Selector Button.

Using the Ovens

Stainless Steel Range
The rack stop-lock prevents the
rack from tilting or being pulled
out of the oven.
To remove, pull rack out and lift up the front.
Oven Control
When roasting, use the B or C rack position.
D
C
B
A