Names And Functions Of Parts And Controls; Front - Sony VSP-BZ10 Operating Instructions Manual

Names and Functions of Parts and Controls

Front

a Standby indicator
This indicator lights or flashes in the
following colors in accordance with the state
of the player.
Indicator state Meaning
Lit orange Powering on
Flashing red Entering the standby state
after powering on
Lit red Currently in the standby
state
Flashing green Readying player operation,
or entering the standby
state from an operating
state
Lit green Player is operating
b 1 (standby) button
Hold this button for at least three seconds to
set the player to the standby state. Press the
button again to start the player.
8
Names and Functions of Parts and Controls
c INFO button
Displays the firmware version, IP address,
current time, and serial number on the
display.
Press the INFO button when the standby
indicator is lit green.
d ACCESS indicator
This indicator lights green when the USB
flash drive is being accessed.
e
(USB) port
When sending data from a USB flash drive
using the Signage Player Management
Software, insert the USB flash drive here.
f SDHC Memory Card slot
Accepts SDHC Memory Cards.
Before inserting an SDHC Memory Card,
make sure to see "Precautions" on page 6.
This is referred to as the "memory card slot"
in this document.