Location And Function Of Parts And Controls; Front - Sony FWD-S42H2 Operating Instructions Manual

Location and Function of Parts and Controls

Front

Parts
1 1 (Power/Standby)
indicator
2 Remote control sensor
10
GB
Description
• Lights up in green when the display is switched on.
• Lights up in red when the display is in standby mode. Lights up in orange when the
display enters the power saving mode while a signal is input from a PC.
When the 1 indicator blinks in red, see page 40.
Note
When the "LED" option in the "Multi Display" settings is set to "Off" and the "Position"
option is not set to the right-bottom, the indicator does not light up in green even when the
display is turned on, except for the case of no signal or an unsupported signal.
Remote control light receptor.