Precautions - Sony VSP-BZ10 Operating Instructions Manual

Precautions

• The specifications of this player are
subject to change for improvements
without notice.
• Screens shown by application software
may differ slightly from the illustrations
shown in this manual.
• For safety, connect the port of this player
only to a network where there is no danger
of excessive voltage or voltage surges.
• The steps described in this manual are
guaranteed only for use under the
following environment conditions.
Operating system:
– Windows XP Professional Service Pack
3 (32-bit) Japanese/English edition
– Windows Vista Business Service Pack 2
(32-bit/64-bit) Japanese/English edition
– Windows 7 Professional Service Pack 1
(32-bit/64-bit) Japanese/English edition
Browser:
Microsoft Internet Explorer 7.0, 8.0
Web server:
– Apache HTTP Server 2.2.17
– Microsoft Internet Information Services
7.5
• This player supports only SDHC Memory
Cards that are formatted with FAT32 file
systems.
• When the ACCESS indicator is lit or
flashing green, the player is reading or
writing data. Ejecting a USB flash drive
while it is being accessed may result in
damage to data or damage to the USB
flash drive.
• When you remove or insert an SDHC
Memory Card, make sure that the power
cord is disconnected.
• To ensure security on the network, setting
a user name and password is
recommended. For information on how to
make these settings, see "Setup screen" in
• Microsoft, Windows, Windows Vista and Internet Explorer are registered trademarks of
Microsoft Corporation in the United States and other countries.
• The SD logo is a trademark.
• The SDHC logo is a trademark.
• All other product names, company names, etc. mentioned in this manual are trademarks or
registered trademarks of their respective owners.
6
Precautions
the "Using the Signage Web Manager"
section.
• Operations that can be performed via a
browser are functions of Signage Web
Manager.
• The current date and time must be set on
the player beforehand. You can use one of
the following two methods to perform the
configuration.
– Configure the NTP server and time
zone settings in the Signage Web
Manager.
c For details on configuration, see
the "NTP Server" and "Time
Zone" settings under the
"Settings" section of "Player
screen" in the "Using the Signage
Web Manager" section.
– Configure the date and time settings in
the Signage Web Manager.
c For details on configuration, see
the "Time" setting under the
"Setup screen" section in the
"Using the Signage Web
Manager" section.