Specifications - Sony VSP-BZ10 Operating Instructions Manual

Specifications

Input/output
Network 10BASE-T/100BASE-TX
(connection speeds may differ,
depending on the network
environment)
Memory card slot
SDHC
USB Hi-Speed USB
(USB 2.0 compliant)
General
200 × 33 × 139 mm (7
Dimensions
5
protrusions)
Mass Approx. 800 g
(28 oz.)
Power consumption
Approx. 14 W
Inrush current (1) Maximum possible inrush
current at initial switch-on
(Voltage changes caused by
manual switching): 48.5 A
peak, 6.5 A r.m.s. (240V AC)
(2) Inrush current after a mains
interruption of five seconds
(Voltage changes caused at
zero-crossing): 7.5 A peak,
2.5 A r.m.s. (240V AC)
Operating temperature
0 °C to 40 °C
(32 °F to 104 °F)
Storage temperature
–20 °C to +55 °C
(–4 °F to +131 °F)
LAN indicators
Link (green)/Act (orange)
Cable length Max. 100 m (328 ft.)
(Category 5e)
Supplied items
Installation Manual
Startup Guide
Media List
Cable tie holder
Vertical stand
CD-ROM (Software & Manuals
for Digital Signage Player)
AC adapter
Recommended power cord
For USA and CANADA only
Part No. 1-757-562-1X
38
Specifications
7 × 1 5
/
8
1
/ in.) (W/H/D) (excluding
2
For Europe only
For Oceania only
Design and specifications are subject to
change without notice.
Notes
• Always make a test recording, and verify
that it was recorded successfully.
SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND
INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF
FAILURE OF THIS UNIT OR ITS
×
/
16
RECORDING MEDIA, EXTERNAL
STORAGE SYSTEMS OR ANY OTHER
MEDIA OR STORAGE SYSTEMS TO
RECORD CONTENT OF ANY TYPE.
• Always verify that the unit is operating
properly before use. SONY WILL NOT
BE LIABLE FOR DAMAGES OF ANY
KIND INCLUDING, BUT NOT
LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF
THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO
FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER
REASON WHATSOEVER.
Part No. 1-575-131-8X
Part No. 1-555-074-5X