11. Remove the weight. Press the LOCK/UNLOCK key.
NOTE: The scale is now in test mode.
12. Press the ZERO key. The display reads 0.00 lb.
NOTE: The scale will now be in normal operation.
Troubleshooting
SYMPTOM
Unit does NOT work properly.
Battery has been replaced and unit still does
NOT work properly.
Display Codes
CAL
CALIBRATION REQUIRED ‐ Indicates improper stored calibration data, calibration is necessary.
OCAP
OVER CAPACITY ‐ Indicates a weight exceeding the capacity has been loaded on the scale.
Jasmine™ Scale JLS5
BACK VIEW OF SCALE DISPLAY
FRONT VIEW OF SCALE DISPLAY
MODEL JLS5
CAPACITY 500 lb, 227 kg
FIGURE 4 Calibrate the Jasmine scale
PROBABLE CAUSE
Battery failure.
6
CAL button
Display Window
SOLUTION
Check battery. Replace if necessary.
Contact Invacare.
Part No 1152408