Atlantis Land A02-RA110 User Manual page 52

Size
Login
Information
Service Name
User Name
Password
Connection
(PPPoA and
PPPoE
encapsulation
only)
Nailed-Up
Connection
Connect on
Demand
Max Idle
Timeout
Subnet Mask
(ENET ENCAP
encapsulation
only)
ENET ENCAP
Gateway (ENET
ENCAP
encapsulation
only)
of cells that can be sent at the peak rate. Type the MBS,
which is less than 65535.
(PPPoA and PPPoE encapsulation only)
(PPPoE only) Type the name of your PPPoE service here.
Enter the user name exactly as your ISP assigned. If
assigned a name in the form user@domain where domain
identifies a service name, then enter both components
exactly as given.
A static IP address is a fixed IP that your ISP gives you. A
dynamic IP address is not fixed; the ISP assigns you a
different one each time you connect to the Internet. The
Single User Account feature can be used with either a
dynamic or static IP address.
Select Obtain an IP Address Automatically if you have a
dynamic IP address; otherwise select Static IP Address and
type your ISP assigned IP address in the IP Address field
below.
The schedule rule(s) have priority over your Connection
settings.
Select Nailed-Up
connection up all the time. The ADSL Router will try to bring
up the connection automatically if it is disconnected.
Select Connect on Demand when you don't want the
connection up all the time and specify an idle time-out in the
Max Idle Timeout field.
Specify an idle time-out in the Max Idle Timeout field when
you select Connect on Demand. The default setting is 0,
which means the Internet session will not timeout.
Enter a subnet mask in dotted decimal notation.
Refer to the Subnetting appendix in the to calculate a subnet
mask If you are implementing subnetting.
You must specify a gateway IP address (supplied by your
ISP) when you select ENET ENCAP in the Encapsulation
field.
COMPACT ROUTER ADSL
Connection
A02-RA110
when you want your
Pag. 44