Table of Contents
Advertisement
Local Start IP
Local End IP
Global Start IP
Global End IP
Server Mapping
Set
Edit Details
Apply
Cancel
Delete
to one global IP address. Note that port numbers do not
change for One-to-one NAT mapping type.
2. Many-to-One: Many-to-One mode maps multiple local IP
addresses to one global IP address.
3. Many-to-Many Overload: Many-to-Many Overload mode
maps multiple local IP addresses to shared global IP
addresses.
4. Many-to-Many No Overload: Many-to-Many No Overload
mode maps each local IP address to unique global IP
addresses.
5. Server: This type allows you to specify inside servers of
different services behind the NAT to be accessible to the
outside world.
This is the starting Inside Local IP Address (ILA). Local IP
addresses are N/A for Server port mapping.
This is the end Inside Local IP Address (ILA). If your rule is
for all local IP addresses, then enter 0.0.0.0 as the Local
Start IP address and 255.255.255.255 as the Local End IP
address.
This field is N/A for One-to-one and Server mapping types.
This is the starting Inside Global IP Address (IGA). Enter
0.0.0.0 here if you have a dynamic IP address from your ISP.
This is the ending Inside Global IP Address (IGA). This field
is N/A for One-to-one, Many-to-One and Server mapping
types.
Only available when Type is set to Server.
Select a number from 1 to 10 from the drop-down menu to
choose a server set from the NAT - Address Mapping Rules
screen.
Click this link to go to the NAT - Edit SUA/NAT Server Set
screen to edit a server set that you have selected in the
Server Mapping Set field.
Click Apply to save your changes back to the ADSL Router.
Click Cancel to return to the previously saved settings.
Click Delete to exit this screen without saving
A02-RA110
COMPACT ROUTER ADSL
Pag. 57
Advertisement
Table of Contents
