Table of Contents
Advertisement
LAN Subnet
Mask
Client IP Pool
Starting
Address
Size of Client IP
Pool
Primary DNS
Server
Secondary DNS
Server
Remote DHCP
Server
IP Address
IP Subnet Mask Type the subnet mask assigned to you by your ISP (if given).
RIP Direction
RIP Version
Multicast
Apply
Cancel
in this case.
When DHCP is used, the following items need to be set:
Enter a subnet mask in dotted decimal notation.
This field specifies the first of the contiguous addresses in the
IP address pool.
This field specifies the size or count of the IP address pool.
Enter the IP addresses of the DNS servers. The DNS servers
are passed to the
DHCP clients along with the IP address and the subnet mask.
As above.
If Relay is selected in the DHCP field above then enter the IP
address of the actual remote DHCP server here.
Enter the IP address of the ADSL Router in dotted decimal
notation, for example, 192.168.1.254 (factory default).
Select the RIP direction from None, Both, In Only and Out
Only.
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
IGMP (Internet Group Multicast Protocol) is a session-layer
protocol used to establish membership in a multicast group.
The ADSL Router supports both IGMP version 1 (IGMP-v1)
and IGMP-v2. Select None to disable it.
Click this button to save these settings back to the ADSL
Router.
Click this button to reset the fields in this screen.
COMPACT ROUTER ADSL
TCP/IP
A02-RA110
Pag. 39
Advertisement
Table of Contents
