Table of Contents
Advertisement
The following table describes the labels in this screen.
Label
Mode
Encapsulation
Multiplex
Virtual Circuit ID VPI (Virtual Path Identifier) and VCI (Virtual Channel
VPI
VCI
Description
From the Mode drop-down list box, select Routing (default) if
your ISP allows multiple computers to share an Internet
account. Otherwise select Bridge.
Select the encapsulation type your ISP uses from the
Encapsulation drop-down list box. Choices vary depending on
what you select in the Mode field.
If you select Bridge in the Mode field, select either PPPoA or
RFC 1483.
If you select Routing in the Mode field, select PPPoA, RFC
1483, ENET ENCAP or PPPoE.
Select the multiplexing method used by your ISP from the
Multiplex drop-down list box either VC-based or LLC-based.
Identifier) define a virtual circuit. Refer to
Enter the VPI assigned to you. This field may already be
configured.
Enter the VCI assigned to you. This field may already be
A02-RA110
COMPACT ROUTER ADSL
Pag. 21
Advertisement
Table of Contents
