Set The Answer Delay; Set The Maximum Message Length - BT 3510 Quick Setup And User Manual

Set the answer delay

1. Select Menu, Answer Phone is displayed, press
2. Press until Answer Settings is displayed,
press .
3. Press or to select either Answer and record or
Answer only and press
4. Answer delay is displayed, press
5. Press or to display the number of rings you
want (0-9 rings or Time saver) and press
Saved will be displayed.

Set the maximum message length

You can set the maximum length that an answer
machine message can be: 1 minute, 2 minutes
or 3 minutes. The default setting is 3 minutes.
1. Select Menu, Answer Phone is displayed, press
2. Press until Answer Settings is displayed,
press .
3. Answer and record is displayed, press
4. Press to display Maximum message length and
press .
5. Press or to select the length you want and
press . Saved will be displayed.
If you need some help, call us on 0800 145 6789* or go to www.bt.com/producthelp
.
.
.
.
Answer machine
The answer delay setting sets
how many times the phone will
.
ring before the answer machine
takes the call. You can choose
from 0-9 rings or Time saver.
The default setting is 4 rings.
Time saver
When you ring in to access your
answer machine remotely, if
you have set Time saver as the
answer delay and you have new
messages it will answer after 10
seconds. If you don't have new
messages it will answer after
20 seconds. This means you
can hang up knowing that you
have no new messages, saving
you the time and the cost of
the call.
.
For compatibility with BT 1571
(or another voicemail service)
Make sure the answer delay is
set for your answer machine
to answer before the voicemail
service. Therefore, the answer
delay should be less than on
your voicemail service. For BT
1571 do not set the answer
delay to more than 5 rings.
41