Battery Performance; Set Up Additional Handsets - BT 3510 Quick Setup And User Manual

6 Quick set-up guide

Battery performance

• To keep the batteries in the
best condition, leave the
handset off the base for a
few hours at a time.
• Running the batteries right
down at least once a week
will help them last as long
as possible.
• After charging your handset
for the first time, subsequent
charging time for the
batteries is approximately
8 hours.
• The charge capacity of
rechargeable batteries will go
down over time, which will
reduce the talk and standby
time. Eventually they'll need
replacing. For details on how
to get replacement batteries,
call the helpline on 0800
145 6789*.
If you need some help, call us on 0800 145 6789* or go to www.bt.com/producthelp
3. Once set-up is complete your handset will display
Please check line cord, place the handset on the
base to charge until step 4.
4. After 24 hours, plug the phone line cord into the
phone wall socket.
IMPORTANT
Charge the handset batteries for 24 hours or your
phone might not work.
Set up your additional handsets (multipacks only)
1. For additional handsets and chargers: plug the
mains power adaptor into the back of the charger
and plug the other end into the mains wall socket
and switch on the power.
2. Activate the batteries as explained on page 5.
3. Place the handset on the charger to charge for
24 hours.
1