Humminbird 767 Operation Manual page 49

531427-1_C - 767_Man_Eng.qxd 10/25/2005
Position Format
(Advanced)
Position Format selects the format of the latitude and longitude position display. This menu
choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode).
To change the Position Format setting:
1. Make sure you are in Advanced User Mode, then highlight Position Format on the Setup
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Position Format.
(dd.ddddd°, dd°mm.mmm', or dd°mm'ss", Default = dd°mm.mmm')
Time Format
(Advanced, International only)
Time Format changes the time format used by the unit This menu choice is available only when in
Advanced User Mode (see Setup Menu Tab: User Mode). International Models only. Time Format selects
a 12 hour or 24 hour format for the time of day displayed when Time + Date is selected as a Digital Readout
on the Sonar View (see Select Readouts).
To change the Time Format:
1. Make sure you are in Advanced User Mode, then highlight Time Format on the Setup
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Time Format.
(12 hour, 24 hour, Default = 12 hour)
Date Format
(Advanced, International only)
Date Format changes the date format used by the unit This menu choice is available only when in
Advanced User Mode (see Setup Menu Tab: User Mode). International Models only. Date Format
selects the format for the date display when Time + Date is selected as a Digital Readout on the Sonar
View. (see Select Readouts).
To change the Date Format:
1. Make sure you are in Advanced User Mode, then highlight Date Format on the Setup
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Date Format.
(mm/dd/yy, dd.mm.yy or yy.mm.dd, Default = mm/dd/yy)
10:30 AM Page 96
87
NMEA Output
(Advanced)
NMEA Output turns the NMEA* output on or off. This menu choice is available only when in
Advanced User Mode (see Setup Menu Tab: User Mode.) NMEA Output should be turned On if you
connect the NMEA Output wires of the GPS Receiver cable to another NMEA-compatible device,
such as an autopilot.
*NMEA 0183 is a National Marine Electronics Association standard for data communication.
The following NMEA sentences are output when NMEA Output is turned On:
DPT- Depth
MTW - Water Temperature
GLL - Lat/Lon Position
GGA - GPS Fix Data
RMC - Recommended Minimum Specific GNSS Data
VTG - Course Over Ground and Ground Speed
ZDA - Time and Date
When navigating, the following NMEA sentences are also output when NMEA Output is
turned On:
APB - Autopilot Sentence B
BWR - Bearing and Distance to Waypoint
RMB - Recommended Minimum Navigation Info
To turn NMEA Output on or off:
1. Make sure you are in Advanced User Mode, then highlight NMEA Output on the Setup
menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the NMEA Output to On or
Off (Off, On, Default = Off).
Sonar
Sonar deactivates Sonar and removes the Sonar Views from the
view rotation. (Off, On, Default = On)
To turn Sonar on or off:
1. Highlight Sonar on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Sonar to On or Off (Off,
On, Default = On).
88