Humminbird 767 Operation Manual page 25

531427-1_C - 767_Man_Eng.qxd 10/25/2005
Sonar X-Press
(Sonar views only)
The Sonar X-Press
frequently-used. Press the MENU key once while in any of the
Sonar Views to access the Sonar X-Press
NOTE: Menu choices will vary depending on system settings such as
whether the unit is set for Advanced User mode or what transducer
is currently selected.
Sonar X-Press TM Menu
10:29 AM Page 48
TM Menu
TM menu provides access to the settings most
TM menu.
39
Side
(WideSide® transducer: WideSide® view only)
Side sets which transducer beam from the WideSide® Transducer is shown in the WideSide®
View. A WideSide® transducer must be connected to the 700 Series™ Fishing System. The Side
menu choice is available when Transducer Select is set to WideSide® (see Sonar Menu Tab:
Transducer Select) and can only be accessed from the Sonar X-Press
WideSide® view.
NOTE: Side requires the purchase of the WideSide® transducer. You can visit our website at
www.humminbird.com to order this accessory online or contact our Customer Resource Center at
1-800-633-1468.
To adjust the Side:
1. Make sure you are in WideSide® Transducer Mode and that a WideSide® transducer is
connected, then highlight Side on the Sonar X-Press
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Side setting.
(L [Left], Both, R [Right], Default = Both)
40
TM menu when you are in
TM menu.