Ericsson Dialog 4223 Professional User Manual page 51

From handsfree to headset
Press
The headset key lamp is turned on.
Headset Preset
By default the phone is set for calls to be connected to
the loudspeaker when you answer or make calls, by
pressing a Line key, so called Loudspeaker Preset. Also
when you dial the number without lifting the handset, the
call is automatically connected to the loudspeaker.
When you use a headset for your telephone, you can
change the setting to get calls connected to the headset
instead, so called Headset Preset. In Headset Preset
mode you can make headset calls by pressing digits
directly (direct dialling). You can also answer headset
calls by pressing a Line Key.
Notes:
Independent, the type of preset setting, when you lift the
handset, the call is always connected to the handset.
Also handsfree and loudspeaking work as usual, i.e. when
the Loudspeaker key is pressed, the call is temporarily
connected to the loudspeaker.
Activation and cancellation of Headset Preset can only be
done when the telephone is in idle mode.
To activate Headset Preset:
Press and hold for at least 4 seconds
A short acknowledgement tone signal is heard, and
"Headset Preset" is displayed for a few seconds.
To cancel Headset Preset:
Press to hold for at least 4 seconds
A short acknowledgement tone signal is heard, and
"Loudspeaker Preset" is displayed for
seconds.
Ericsson Dialog 4223
a few
50