Attached Devices - NETGEAR WN3100RP User Manual

Table 1. Show statistics fields
Field
LAN or WLAN (Port)
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
Poll Interval

Attached Devices

Use the Attached Devices screen to find out the devices that are connected to the extender.

To view the devices that are attached to your extender:
Select Maintenance > Network Devices.
A screen similar to the following displays:
Universal Pass Through WiFi Range Extender WN3100RP
Description
The statistics for the LAN (local) and wireless LAN (WLAN) ports.
The link status of the port.
The number of packets transmitted on this port since reset or manual clear.
The number of packets received on this port since reset or manual clear.
The number of collisions on this port since reset or manual clear.
The current line utilization—percentage of current bandwidth used on this port.
The average line utilization for this port.
The time elapsed since the last power cycle or reset.
Specify the poll interval frequency. If you change this value, click the Set Interval
button so that your change takes effect.
Extender Network Settings
33