Use The Smart Wizard To Change The Settings - NETGEAR WN3100RP User Manual

Universal Pass Through WiFi Range Extender WN3100RP
• The Status screen displays with the menu on the left. This screen shows what the
current settings are for the extender:
Menu

Use the Smart Wizard to Change the Settings

The Smart Wizard can help you set up your extender to connect to a wireless network. For
information about more configuration options, see
The Universal Pass Through WiFi Range Extender WN3100RP Installation Guide (included
in the package) explains how to install your extender. During installation, when you launch
your Internet browser, the Smart Wizard automatically displays.
After installation, you can change the extender network settings if you want. For example, if
you change your network name, you can log in to the extender and change its network name
to match.

To use the Smart Wizard again after installation:
1. Log in to the extender.
For more information, see
Note: Once you begin using the Smart Wizard, you must complete all of its
steps before you can exit.
2. From the menu, select Setup Wizard.
Status screen
Chapter 2, Extender Network
Log In to the Extender
Getting Started
18
on page 17.
Settings.