Connect The Extender To Your Wifi Network - NETGEAR WN3100RP User Manual

Connect the Extender to Your WiFi Network

Do not cable the extender to the router or gateway. The extender connects to your wireless
network only with WiFi. You can use the extender's Wi-Fi Protected Setup (WPS) or the web
browser method.

To connect using WPS:
1. Press the WPS button on the side of the extender.
The WPS LED blinks.
2. Within two minutes, press the WPS button on your wireless router or gateway.
The Router Link LED lights.
The WPS LED lights green.
The extender network name changes. See
page 16.

To connect with the web browser method:
1. On your computer or wireless device, find and join the NETGEAR_EXT WiFi network.
The Client Link LED lights.
2. Open a web browser.
3. When prompted, select a language from the list.
NETGEAR genie displays.
4. Follow the steps to connect the extender to the WiFi network.
When the extender connects, the Router Link LED lights.
Universal Pass Through WiFi Range Extender WN3100RP
Getting Started
New Extender WiFi Network Name
15
on