Install The Extender; Place The Extender And Power It On - NETGEAR WN3100RP User Manual

Universal pass through wifi range extender
Hide thumbs Also See for WN3100RP:
Table of Contents

Advertisement

Universal Pass Through WiFi Range Extender WN3100RP
Make sure that your Ethernet cable is securely connected to the extender and to the
computer. If the cable is not securely connected, reconnect the Ethernet cable and
relaunch your Internet browser.

Install the Extender

Place the extender, apply power, and connect it to your WiFi network.

Place the Extender and Power It On

1.
Place the extender halfway between your router or gateway and the location that has
poor WiFi coverage.
If it is not possible to place the extender at the halfway point, move the extender closer to
the location with poor coverage, but still within the wireless range of the router or
gateway.
2.
Turn the On/Off switch on the side of the extender to the On position.
3.
Plug the extender into a power outlet and wait one minute until the extender starts.
The Power LED lights green.
4.
Connect the extender to your WiFi network.
a. Connect the extender to your router or gateway.
For more information, see
b. Connect your clients to your extender.
For more information, see
On/Off switch
Connect the Extender to Your WiFi Network
Join the Extender WiFi Network
Getting Started
14
on page 15.
on page 16.

Advertisement

Table of Contents
loading

Table of Contents