Connect The Extender To An Existing Network - NETGEAR WN3100RP User Manual

Universal Pass Through WiFi Range Extender WN3100RP

Connect the Extender to an Existing Network

You can connect the extender to your home network. Only a wireless connection is
supported. The extender is not able to connect to your home network with a cable.

To connect the extender to an existing network:
1. Select Setup > Connect to an Existing Network.
The extender scans for wireless networks and displays a list.
If your wireless network is not on the list and is running, see
Power It On on page 14 for suggestions.
2. Select the radio button for your network and click the Continue button.
A screen similar to the following displays:
3. Enter your network's passphrase or key.
4. Click the Continue button.
The extender joins your wireless network. For information about how to monitor the
quality of the connection, see Monitor Extender Performance
Extender Network Settings
24
Place the Extender and
on page 17.