Waypoint Mode; Manually Excluding Stretches Of The Journey - Skoda Columbus Operating Instructions Manual

– Press to select an entry behind which the selected tour
■ Move Continue
destination should be moved.
- enter home address
■ Destination entry
Leave tour mode
Press the button → .
NAV Extras
- end tour mode.
■ Leave tour mode

Waypoint mode

Enter waypoint tour
Press the button → →
NAV Extras
- create new toure in the waypoint mode
■ Load waypoint tour
- create new tour, first enter the name
■ New tour
■ Automatic - the waypoints are automatically recorded
- all waypoints must be entered manually
■ Manual
- extend existing tour
■ Extend existing tour
■ Edit waypoint tour(s) - open the list of the saved waypoint tours. Press the corre-
sponding waypoint tour for selection.
Select and edit the saved waypoint tour
Press the button
NAV → Extras →
- open the list of the saved waypoint tours. Press the corre-
■ Load waypoint tour
sponding waypoint tour for selection.
■ Edit waypoint tour memory - open waypoint tour memory. Stored waypoint tours
can be displayed, renamed or deleted.
- open the list of the saved waypoint tours. Press the corre-
■ Edit waypoint tour(s)
sponding waypoint tour for selection.
- delete waypoint tours
■ Delete waypoint tours
Leave tour mode
Press the button
→ →
NAV Extras
→ .
Waypoint navigation Waypoint tour
.
Waypoint navigation → Memory
.
→
waypoint nevigation New destination
- terminates the waypoint nav. and opens the menu New dest.
■ Onroad destination
for selection of an "Onroad destination" from the available navigation data.
- switches back to the waypoint mode.
■ Cancel

Manually excluding stretches of the journey


Temporarily blocked road
A temporarily blocked road is only taken into account in the current route guid-
ance.
During route guidance, press the function key
overview map will be displayed with the current vehicle position  and the travel
destination .
Turn the menu knob counter-clockwise, move a flag symbol  starting from
15
the travel destination in the direction of the current vehicle position. Use a finger
to press on the displayed route and the flag symbol  will "skip" directly to this
point. The distance taken up by the current congestion will be displayed as of the
current vehicle position at the bottom in the touch-screen.
Press set control knob or the function key
of the route section to block.

You will receive an audible announcement that parts of the route are blocked and
that the alternative route is being calculated.
Received TMC traffic reports will be displayed in the map as traffic problems. Cur-
rently announced traffic problems can also be displayed in the list of TMC traffic
reports.
Permanent block
A permanently blocked road is taken into account during each route destination
cycle.
Press the function key
Route →
during route guidance.

- add an additional blocked section to the route . Locate
■ Add excluded street section
the start of the congestion  by pressing on the route indicated on the touch-
screen and confirm it by pressing the function key
tion is set in the same way.
■ Delete excluded street section - delete the blocked street sections from the memory
in the navigation system
- deletes the congestion entered with the button
■ Delete temporary congestion
Congestion ahead
.../ ... → → Congestion ahead
 
to display the approximate length
OK
in the main menu Navigation
Manage blocked routes
. The end of the conges-
OK
NAV mode (Navigation)

. An

35