Product Overview - Skoda Columbus Operating Instructions Manual

Hide thumbs Also See for Columbus:
Table of Contents

Advertisement

the on-board voltage of the vehicle or after a fuse failure, the code must be en-
tered before the system can be used again. The code number can only be called
up "online" via the ŠKODA system, as this guarantees even more effective anti-
theft protection. If necessary, visit a ŠKODA Partner
Enter code
If a keypad appears after switching on with the command to enter the code, the
unit must be unlocked by entering the correct four-digit code.
Enter the four-digit code using the function keys
in the entry line.
After a four-digit order has been entered, the group of digits will turn grey (inac-
tive) and no further digits can be accepted in the entry line.
To delete the digits in the entry line from right to left, press the function key
on the screen.
When the correct code is displayed in the entry line, press the function key
Incorrect code number
If an incorrect code is confirmed after entry of the code, the procedure can be re-
peated once again. The number of attempts is shown in the bottom screen line.
If the code is entered incorrectly a second time, the unit will be blocked for ap-
prox. one hour. It is possible to enter again the safety code after one hour has ex-
pired, when the unit and the ignition have been switched on.
If two invalid attempts are then made again, the radio navigation system will be
blocked again for one hour.
Note
The code is normally saved in the instrument cluster memory. This ensures that it
is automatically decoded (convenience coding). Manual input of the code is nor-
mally not necessary.
Screen display
The screen of the unit displays information such as information from the Clima-
tronic, the vehicle distance to an obstacle if the "parking aid" has been activated,
etc.
1)
Explanation of terms
»
Owner's Manual, chapter Foreword.
4
General information
.
1)
to
. The digit is accepted
0
9
.
OK

Product Overview

Fig. 1 Equipment overview
- Setting up button
1
for switching the equipment on and off (press)
for volume adjustment of audio source currently being played /
voice control (turn)
- Radio operation
2
RADIO
- MEDIA operation
3
MEDIA
- Phone mode
4
PHONE
– tone and volume settings
5
TONE
- Map display
6
MAP
- Navigation operation
7
NAV
- Displaying TMC traffic alerts
8
TMC
9
- Settings in the individual operating modes
SETUP
5
13
14
22
25
26
29
37
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents