Input Screen For Route Guidance; Main Menu Navigation - Skoda Columbus Operating Instructions Manual

Using a new navigation DVD/Updating the navigation data in the system
›
Insert the navigation DVD into the CD/DVD slot with the printed side facing up
until it is automatically drawn in. The unit will compare the data on the naviga-
tion DVD with the data in the navigation system memory. No message will ap-
pear if the data in the navigation system memory of the unit is identical to the
data on the navigation DVD.
›
If the data of the navigation DVD is not identical to that stored in the naviga-
tion memory of the unit, a corresponding message will be displayed. Press the
function key to used the data on the navigation DVD.
Continue
›
Press the function key to overwrite the data in the navigation memory
Save
with the data of the navigation DVD. During the copy or update process, the
old navigation data will be irretrievably deleted and cannot be restored.
›
Press the button to get a notification when the storage process has
→
Notify

finished.
Use data of a navigation DVD for a short period of time
›
If you leave the stored area map in the navigation memory of the unit for only a
short period of time, insert the navigation DVD for the area you will be driving
in.
›
Press the function key
→
Continue
the navigation DVD for the navigation.
›
If you are again in the area of the map material stored in the navigation memo-
ry, press the key to take out the navigation DVD.

Up to date navigation data and new navigation DVD
Road guidance is subject to constant changes (e.g. new streets, changes of street
names and house numbers). A navigation DVD is a huge data store, which un-
fortunately will not be up to date after a certain time. This could cause problems
during route guidance.
It is for this reason that you must regularly update the navigation data on your
unit with a current navigation DVD.
Version of the navigation data
Keep pressing the button
→
SETUP
4-digit code number which is the version of the navigation data. Further informa-
tion is available from a ŠKODA Partner.
30
NAV mode (Navigation)
. The unit uses only the data from
Temporarily
until you see a
→
Version info Map version DVD

Input screen for route guidance

Selecting a destination from the list
›
Press the function key after opening the input screen, to open a list of all

the destinations matching the relevant parameters that can also be selected
from the navigation memory (e.g.
›
If necessary, move the slider at the right edge of the touch-screen for all entries
in the list to be displayed.
›
Press the desired entry in the list to take it over for the address.
Limit destination and select from the list
›
You can open a list of the selectable destinations any time by pressing the func-
tion key while entering a destination in the entry line. The list only displays
**
destinations which meet the requirements, which match the character se-
quence in the entry line and which are saved in the navigation memory of the
radio navigation system.
›
The number of selectable destinations will be displayed in the function key
fewer than one hundred destinations can be selected.
›
If fewer than six destinations are selectable, the input screen will close auto-
matically and a list of possible destinations will be displayed.

Main menu Navigation

Introductory information

Press the button .
NAV
and ).
Country City
Fig. 14
Main menu Navigation with ad-
dress.
if
**

