User Options - Amana 12695301 Owner's Manual

User Options

Didn't like an option?
Factory settings are marked in bold. To
change the oven back to the factory
setting, simply select the option that is
marked in bold.
My changes weren't
saved.
In order for any changes to be
saved, the START pad must be
pressed after selecting an option.
Shutting the oven door or pressing the
STOP/RESET pad will not save changes.
Numbered Pads
1
End of Cycle Beep
2
Speaker Volume
3
Key Beep
4
Keyboard Enable
Window
5
Add Time During Heating
6
Reset Door Open
7
Maximum Heating Time
8
Manual Operation
9
Double Digit Operation
Changing user options
Options such as single or double pad programming, beep volume, and
maximum cooking time can be changed to suit individual preferences.
To change options:
1. Open oven door.
• If door is closed or RESET pad is pressed before programming is
complete, changes are discarded and microwave exits programming
mode.
2. Press and hold pad 2 for approximately 5 seconds.
• This begins options mode.
• Microwave will beep and 0P: displays. Microwave is now in
programming mode.
3. Press number pad that controls option to be changed.
• See table below for options.
• Current option will display.
4. Press number pad again to change the option.
• Each time pad is pressed, option will change.
• Match code displayed with code for desired option.
5. Press START pad to save changes.
• To change additional options, repeat steps 3 and 4.
• Changes appear after door is closed or STOP/RESET pad is pressed.
Display Options (Factory Settings in Bold)
OP:10 3 second continuous beep.
OP:11 Continuous beep until door is opened.
OP:12 5 beeps bursts until door is opened.
OP:20 Eliminates beep.
OP:21 Sets volume to low.
OP:22 Sets volume to medium.
OP:23 Sets volume to high.
OP:30 Prevents beep when pad is pressed.
OP:31 Allows beep when pad is pressed.
OP:40 15 seconds after oven door is opened, keyboard disabled.
OP:41 30 seconds after oven door is opened, keyboard disabled.
OP:42 1 minute after oven door is opened, keyboard disabled.
OP:43 2 minutes after oven door is opened, keyboard disabled.
OP:50 Prevents adding heating time while oven is heating.
OP:51 Allows heating time to be changed while oven is heating when a memory pad
is pressed.
OP:60 Allows oven to resume heating time countdown after door is opened during cycle.
OP:61 Cancels heating time count down after door is opened during cycle.
OP:70 Allows 60 minutes of heating time.
OP:71 Allows 10 minutes of heating time.
OP:80 Allows use of preprogrammed pads only.
OP:81 Allows use of manual time entry and preprogrammed pads.
OP:90 Allows 10 (0-9) preprogrammed pads.
OP:91 Allows 100 (00-99) preprogrammed pads.
10