Waypoint - Icom IC-M91D Instruction Manual

■

Waypoint

You can store your vessel's position information wherever you
are, and also the position information of the vessel you re-
ceived a DSC call from, as a waypoint. The transceiver can
store up to 50 waypoints. Each waypoint can be programmed
with an alphanumeric name for easy recognition. Names can
be a maximum of 10 characters.
To store your position:
➥ Hold down [WP] for 1 second to store the waypoint.
• Two beeps sound.
• After memorizing the waypoint, the information screen "WAY-
POINT WAS STORED" appears.
• If the GPS receiver has not yet calculated the position, the way-
point cannot be stored.
• If you have already stored 50 waypoints, the new waypoint can-
not be stored.
OTHER FUNCTIONS
To store a received position:
After receiving a DSC call that includes the position informa-
tion, the position can be registered as a waypoint.
q
Enter "RCVD CALL LOG" in the DSC CALLS menu.
➪ ➪
❮MENU❯ ❮DSC Calls❯ ❮Received Call Log❯
(Push [MENU]) (Push []/[], then push [ENTER].)
• Pushing the [LOG] softkey also opens the screen.
w ] or [] to select "Distress" or "Others," then push
Push [
[ENTER].
e
] or [] to select the desired item, then push [EN-
Push [
TER].
r
Push [WP] to store.
• The confi rmation screen "STORE WAYPOINT?" appears.
t
Push [OK] to register the received position as a waypoint.
• If you have already stored 50 waypoints, the new waypoint can-
not be stored.
• The received position is stored with its MMSI ID code as the
waypoint name. If the ID code has been programmed in your
Individual address, the position is stored with the name instead
of the ID code.
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
74