D Programming Group Id - Icom IC-M91D Instruction Manual

New2001
8
DSC OPERATION
D
Programming Group ID
q
Enter "GROUP ID" in the DSC SETTINGS menu.
➪
❮MENU❯
(Push [MENU]) (Push [Y]/[Z], then push [ENTER].)
w
Push [ADD].
• The "GROUP ID" program screen is displayed.
e
Enter a desired group ID in the following way:
• Select a desired number using [Ω]/[≈].
• Push [ENTER] to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENTER].
The fi rst digit is fi xed as '0' for a Group ID.
The fi rst two digits are '0' for any Coast station ID.
r e to input the specifi c 9 digits group code.
Repeat step
21
➪
❮DSC Settings❯ ❮Group ID❯
t
After entering the 9 digit code, push [ENTER] to set it.
• The Group ID name programming screen is displayed.
y
Enter a desired 10 digit ID name in the following way:
• Select a desired character using [∫]/[√]/[Ω]/[≈].
• Push [ENTER] to set it.
• To move the cursor, select either arrow, "←" or "→," then push
[ENTER].
• Push [123], [!$?] or [ABC] to select a character group.
u
After entering the ID name, push [
"FINISH," then push [ENTER] to program it.
• The "GROUP ID" list screen is displayed.
i
Push [MENU] to exit the MENU screen.
∫]/[√]/[Ω]/[≈] to select
New