Other Functions; Waypoint - Icom IC-M510 Instruction Manual

NOTE: For the other functions, the transceiver must be receiving valid GPS signals, or
your position must be entered. (p. 20)

■ Waypoint

Waypoints are GPS position data points of places you want to go to, the position of your
vessel, or a vessel you received a DSC call from. You can enter up to 100 waypoints with
names of up to 15 characters. You can enter your current position data, or add one as a
destination or landmarks you often go to, for easy access.
D Using the Waypoint list screen
The transceiver saves up to 100 waypoints in the Waypoint list.
1. Open the "Waypoint" screen.
[MENU] > Navigation > Waypoint
L You can also add your current position as a waypoint
by pushing Add .
2. Push [▲] or [▼], or rotate [CH/ENT] to select a
waypoint.
3. Push the Software Key below for your next operation.
Sorts the waypoints by Name or Range.
Sort :
Displays the details on the selected
Details :
waypoint.
L You can also edit or delete the
waypoint, or start navigating to the
waypoint on the "Detail" screen.
Starts navigating to the selected
NAV
:
waypoint. (p. 64)
(Navigation)
Enters a waypoint. (p. 63)
Add
:
Edits the selected waypoint. (p. 64)
Edit
:
Deletes the selected waypoint. (p. 64)
Delete :

OTHER FUNCTIONS

9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
62