Kohler K91 Service Manual page 70

1 8 . Slip the handle and rope retainer onto rope.
Tie a single knot at the end of rope and install
rope retainer into handle. Refer to Figure
7-1 2 .
1 9 . Untie the slip knot and pull the handle out until
the rope is fully extended . Slowly retract the
rope into the starter. If the spring has been
properly tensioned . the rope will fully retract
until the handle h its the housing .
Figure Winding Rope Onto Pulley.
7-23.
7 . 1 2