AI R CLEANER AND AI R I NTAKE SYSTEM
K series engi nes are equipped with a hig h-density
paper air cleaner element . Engines of some speci
fications are also equipped with an oiled foam
precleaner that surrounds the paper element . Re
fer to Fig u re 5-1.
AIR CLEAN ER DISAS SEMBLY
1 .
Remove the wing nut and air cleaner cover.
2 .
Remove the precleaner ( if so equipped) , pa
per element and seal .
3.
Remove the base screws , air cleaner base ,
gasket and hose .
SECTION 5
DRY ELEMENT �
Figure 5-1 . Air Cleaner Assembly - Exploded View.
AIR CLEANER S ERVICE
P recleane r
If so equipped , wash and re-oil the precleaner
every 25 operating hours ( more often under ex
tremely dusty or dirty conditions) .
1 .
Wash the precleaner in warm water and deter
gent .
2 .
Rinse the precleaner thoroughly until all traces
of detergent are eliminated . Squeeze out ex
cess water (do not wring) . Allow precleaner to
dry.
3.
Saturate the precleaner with clean , fresh en
gine oil . Sq ueeze out excess oil .
4 .
Rei nstall t h e precleaner over t h e paper ele
ment .
"'--- -- -
PRECLEANER
(OPTI ON)
5. 1