Advertisement
( 11 ) BRIDGE MODE
The MODE switch
12
determines whether the CF 200 operates in the 2 x
(
)
stereo mode, or in the 200W mono mode. To avoid accidental switching between
lower screws are never removed simultaneously. When the MODE
in the MONO BRIDGE position, the CF 200 operates as a mono 200W amp. Use
the two binding posts to connect speaker cabinets. Ideally, use cables with
terminals or banana plugs. Minimum impedance: 8 ohms.
Black binding post: negative. Red binding post: plus
The INPUT RIGHT and the VOLUME RIGHT control are activated in the
BRIDGE MODE.
( 13
INPUTS
)
The input jacks are suitable for preamps or mixers. Both channels automatically
amplify the signal if only the INPUT RIGHT jack is accessed. In the BRIDGE
MODE, only the INPUT RIGHT is activated.
SIGNAL ROUTING DIAGRAM
line Out left
Input left
CF
200
left
Input
Cabinets e.g. HUGHES R KETTNER
OOW
1
switch (
12
is
)
line Out Right
Input Right
Stereo Speaker Outs
Right
input
Advertisement
