Configuring an SMTP server
1. Enter the hostname or the IP address of the SMTP server.
2. Enter the port of the SMTP server.
3. Specify the sender's name in the "Sender's name" field.
4. Enter the sender's e-mail address.
5. Check "Enable Authentication" and enter the username and password of the
SMTP server and it requires authentication.
6. Click "Apply" to save the configuration.
6.3.4 Event Triggers
We have finished defining how an event will be triggered and which servers will
be receiving notifications in the previous two sections, now we can finish up
the event configuration by setting.
Which channels will have event trigger function enabled.
What is considered to be an event.
Where the warnings will be sent to and how they will be sent.