Event Configurations; General Settings - Planet NVR-401 User Manual

4-channel network video recorder

Hide thumbs Also See for NVR-401:

Table of Contents

6.3 Event Configurations

The "Event Configurations" section allows users to define conditions that

constitute an event, its corresponding trigger action and when it will be

triggered. Such setting can reduce the management overhead and notify the

administrator only when it's necessary.

The general settings section can help you quickly configure when an event is

triggered, how often events are triggered and the corresponding actions

when events are triggered.

Start the event configuration by defining the general settings:

Define when an event will be triggered.

Choose "Always" or "Only during..." under "Event Trigger Duration".

For the "Only during..." option, choose the days by using the check-box

and then define the time range in those days in the "Start Time" and

"End Time" fields that you would like the event trigger function to be

enabled.

How often an event is triggered

Set a time interval under "Event Trigger Interval" to define how often

events are triggered.

Trigger action

Now that you have the event trigger duration and interval defined, choose

what action to be taken during an event trigger:

You can choose to have the recorder send out the first few frames of the

video recorder upon an event is triggered.

You can also choose to have the recorder send out a warning message

in e-mail or in txt file format and upload it to a destined FTP server.

Table of Contents