Framing And Clearances; Selecting Appliance Location - Heat & Glo CERONA-36 Owner's Manual

5 5

Framing and Clearances

A. Selecting Appliance Location
When selecting a location for the appliance it is important to
consider the required clearances to walls (see Figure 5.1).
WARNING! Risk of Fire or Burns! Provide adequate
clearance around air openings and for service access.
Due to high temperatures, the appliance should be locat-
ed out of traffi c and away from furniture and draperies.
H
A
F
Figure 5.1 Appliance Locations
18
A
B
C
In addition to these framing dimensions, also reference the following sections:
• Clearances and Mantel Projections (Sections 5.C, 5.D and 5.E)
• Vent Clearances and Framing (Section 8).
G
CERONA-36 A
Inches 51 42-1/8
Millimeters 1295 1070
CERONA-42 A
Inches 56-5/8 49-1/8
Millimeters 1438 1248
Heat & Glo • Cerona-36, Cerona-42 • 2106-900 Rev. K • 12/10
NOTICE: Illustrations refl ect typical installations and are
FOR DESIGN PURPOSES ONLY. Illustrations/diagrams
are not drawn to scale. Actual installation may vary due to
individual design preference.
D
ALCOVE
INSTALLATION
E
B
B C D E
73-1/4 36 65-1/2
1861 914 1664
B C D E
80-1/8 36 72-1/2
2035 914 1842
F G H
1/2 22-1/4 16
13 565 406
F G H
1/2 22-1/4 18-3/4
13 565 476