Introduction; Organization; Safety Considerations; Related Documents - Agilent Technologies 6631B Service Manual

Introduction

Organization

This manual contains information for troubleshooting and repairing to the component level the Agilent
Model 6631B System DC Power Supply. Hereafter it will be referred to as the dc power supply.
This manual is organized as follows:
Chapter 1 Organization
Performance tests
Chapter 2
Chapter 3 Troubleshooting procedures
Chapter 4 Principles of operation on a block-diagram level
Replaceable parts
Chapter 5
Chapter 6 Diagrams

Safety Considerations

WARNING:
Hazardous voltages exist within the dc power supply chassis.
This dc power supply; is a Safety Class I instrument, which means it has a protective earth terminal. This
terminal must be connected to earth ground through a power source equipped with a 3-wire, ground
receptacle. Refer to the "Safety Summary" page at the beginning of this manual for general safety
information. Before operation or repair, check the dc power supply and review this manual for safety
warnings and instructions. Safety warnings for specific procedures are located at appropriate places in the
manual.

Related Documents

The following documents are shipped with your dc power supply:
a a User's Guide, containing installation, operating, and calibration information
a a Programming Guide, containing detailed GPIB programming information.
1
9