Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung 403 User Manual

When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
✎
The position of power input port may differ depending on the model.
TV Rear Panel
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
1 Selecting a language
2 Selecting Store Demo
or Home Use
3 Selecting an antenna
4 Selecting a channel
5 Setting the Clock
Mode
6 Viewing the HD
Connection Guide
7 Enjoy your TV.
If You Want to Reset This Feature...
O
MENUm Setup

Connecting to an Antenna

Plug & Play (Initial Setup)
Press the or button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
Press the or button, then press the ENTERE button.
Select the Home Use mode. Store Demo Mode is for retail
environments.
To return the unit's settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume in the OSD, press and hold
Press the or button, then press the ENTERE button. Select Air, Cable or Auto.
✎
In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the , ,
The channel search will start automatically.
For more information, refer to Channel
✎
Press the ENTERE button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
✎
If you select the Auto, set the daylight saving time.
Select the time zone where you live.
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
Plug & Play ENTERE
VHF/UHF Antenna
Cable
or
MENU for 5 sec.
or button, then press the ENTERE button.
Auto Program. (P. 12)
Plug & Play
Language
Time
Game Mode
V-Chip
Caption
Melody
POWER
P
: English
: Off
: Medium
7
English